Last month, we took delivery of the brand new Compatto Target, a special model from Brocock aimed speciﬁcally at hunter ﬁeld target shooting. It largely follows the format and proﬁle of the standard Compatto but comes pre-ﬁtted with the highly regarded Huma-Air regulator. It’s an exciting concept for sure, and this month we’ ll get hands-on to see how it performs where it matters.
Brocock Compatto Target Features
|Pre-charged from a high pressure pump / dive cylinder|
|3 power settings (low, medium and high)|
|Single Shot Tray|
|Removable self indexing 10 shot rotary magazine|
|Slingshot hammers system|
|Synthetic ambidextrous stock|
|2 Stage trigger|
|Resettable safety catch|
|Available up to 30 ft/lbs muzzle energy|
|Full length, built in fully baffled silencer with adapter for second stage silence|
|.177, .22 cal|
|Length 34” (864mm)|
|Weight 3.17 kg|
Charging the Compatto Target is very straightforward, and utilizes the push-probe system, which is arguably the quickest, but still requires some care in the routine adopted. First, twist the valve cover at the front of the cylinder to expose the inlet valve, then fully insert the ﬁlling adaptor from the airline. I would always recommend using Best Fittings, Quick Couplers now because they make charging pneumatics, especially several different makes, very simple and hassle-free. The adaptor supplied from the manufacturer is simply screwed onto a coupler, using a Doughty seal, and thereafter, the adaptor just needs to be plugged into the bayonet Forster style end on the airline.
Set up a number of adaptors in this way, and a quick change over is done in a second; plug-in, plug out with not a damaged thread in sight.
The Compatto Target needs 200bar of ﬁll pressure, and with this on board, remove the probe, close the valve cover, and we’re nearly ready for action. I can’t help thinking that a competition riﬂe is probably best as a single-shot, but this Compatto Target comes with the standard ten-shot rotary magazine system as used in the standard model. The magazine has a nice solid feel to it, but there is a fair bit of play between the mag’ and its slot within the breech block. We now need to load up the magazine, so ﬁrst pull back the cocking bolt to the rear, slide the magazine free of the action from the left, and then drop pellets nose ﬁrst into each chamber, gently seating each one with the ﬁnger before rotating the drum to ‘catch’ its next spring-loaded position. With the mag’ full, slide it back into the breech block from the left side and close the bolt. These indexes the ﬁrst shot. Subsequent cycling of the bolt will cock the hammer and index the magazine each time. Before the action can start, it’s worth spending time adjusting that butt pad. It only takes a second to slacken the large Allen bolt at the rear; then the pad can be slid up or down on its axis, ideally with a small amount of resistance, so it will hold its desired position before we ﬁnally tighten it in place. Take the time to set it gently in one position, then see how the scope lines up with the gun mounted. Make adjustments to the pad, a little at a time, and when the setting is bang on, and the head falls into place naturally on the stock without straining, you know you’re getting close. Once all this happens, and a full sight picture is easily achieved through the scope, tighten the bolt, and everything will be locked into place.
My initial aim was to sight-in the scope, an MTC Viper Pro that came with the test riﬂe. With this completed, it was time for some serious grouping, and with this in mind, I moved straight to 35 yards, to push the Compatto Target that little bit more.
It is important to adopt a positive bolt action when cocking because the system will revolve the magazine yet not cock the hammer if done very gently, which isn’t ideal.
Be positive and all works well. The stock feels great, I have to say. Of course, the personal shape will dictate just how effective it all feels, but my large hands were immediately at home. The fore end might look like it comes up a little short, but in the aim, I didn’t touch the cylinder either, which is all you need to know.
Initial results were reasonable, but I did notice the occasional ﬂyer, that ruined some otherwise really good groups. No such problem with my standard Compatto on a previous test, so maybe I was just unlucky with the magazine. As it stood, Webley Accupells managed a little under three-quarter-inch best groups, and Air Arms Diabolo Field and Sovereigns both posted sub half-inch – a level of accuracy that would please in most circumstances, admittedly, but those occasional ﬂyers were bugging me. It suddenly dawned on me, though, that there’s sufﬁcient clearance within the breech block cut out, to single feed this model, so that’s what I did. A revelation, in fact; no more ﬂyers, and instead, some deadly accurate groupings.
Sovereigns reduced to sub quarter-inch, centre-to-centre over 35 yards, and just a quarter inch center to center over 40 yards – simply superb, and of a beanbag to test potential fully, and relatively easy to come by. Rowan Engineering also makes a single-shot loader for this model, and with this ﬁtted, I replicated my best groups all around. It’s a super-neat and safe option too.
A sweet two-stage trigger helps of course. Next stop, the chronograph, and with Brocock ﬁtting their Compatto range with a three-level power adjuster, I was keen to check these levels to start. High power clocks in at around 11.5 ft.lbs., medium came in around 9.7 ft.lbs., and switch to low, and you can expect around 6.6 ft.lbs. These ﬁgures are a little higher than the early Compatto I tested, but the principle works really well, bringing great versatility.
OK, it’s time to see how effective that Huma regulator is, and how it compares with the standard model. Over the chrono’, using Air Arms Diabolo Fields, I clocked a textbook average velocity of 789fps, with a total variation of 16fps. Not quite the single ﬁgures hinted at, but in a real-world ‘pellets from the tin’ scenario, you’ ll never notice a total spread of 16fps, believe me! In terms of shot count, I hit 86, before velocities went dramatically south, and whilst that’s lower than the factory claim, again in the real world, it’s plenty.
Glancing back at my shot statistics from the standard Compatto test, I managed 80 shots within 17fps with the standard Slingshot action, so I have to conclude that I have experienced little discernible difference on the test. That said, this Target model shoots particularly well single-loaded, and that for me, would be the way to go; incredible accuracy and great consistency, to the point where I’d deﬁnitely feel happy competing with it.
Video: Brocock Compatto Target Review
|Overall Length||34 Inches (864 mm)|
|Barrel||18 inches (457 mm) Lothar Walther – Choked/Crowned|
|Dovetail Width||11.5 mm|
|Available Calibres||.177 (4.5 mm), .22 (5.5 mm), .25 (6.35mm)|
|Weight||6.99 lbs (3.17 kg)|
|Magazine||(Removable) 10-Shot rotary|
|Valve Type||Self Regulating|
|UK Power/Shots per charge||.177 cal gives 115 shots, .22 cal gives 125 shots|
|Export Power/Shots per charge||.25 cal 28 ft/lbs gives 30 shots, .22 cal 27 ft/lbs gives 30 shots|
|UK Charge Pressure||200 bar|
|Stock||Anti-Slip (Soft Touch)|
|Trigger||Two stage adjustable|
|Export/FAC Charge Pressure||240 bar|
But this rifle is not selling on Amazon. You have to browse company website or eBay. But there is more product on Amazon. You may take a look.
[amazon_link asins=’B01MQT5H49,B00EWOMOYA,B00KNB0AL0,B00T9S3OBQ’ template=’ProductCarousel’ store=’str0535-20′ marketplace=’US’ link_id=’a35441c9-6505-11e8-a21f-4386a55c348d’]
As previously mentioned, it should be noted that Huma-Air regulators are not available from Brocock as a retro ﬁt for existing Compattos. However, existing Compatto owners can still contact Huma directly, and get a special version of their regulator to ﬁt these models.